Hubei crusher is widely used in mining, smelting, building materials, road, railway, water conservancy and chemical industry and many other industries. For all kinds of materials whose compressive strength does not exceed 320 light bars, the maximum bulk degree of the materials to be broken shall not be greater than that specified in the technical parameters table. This series of jaw crusher has the characteristics of large crushing ratio, uniform product particle size, simple structure, simple performance and easy repair, and economic operating costs.

Working principle
When the jaw crusher is working, the movable jaw plate makes periodic reciprocating movement to the fixed jaw plate, sometimes close to and sometimes away. When approached, the material is crushed by extrusion, splitting and impact between the two jaw plates; When leaving, the material that has been broken is discharged from the discharge port by gravity.
In the process of breaking large stones into small stones, the first crusher is usually the "main" crusher. The oldest and strongest crusher is the jaw crusher. When feeding the jaw crusher, the material is poured into the crushing chamber containing the jaw teeth from the top entrance, the jaw teeth push the material towards the wall of the chamber with great force, breaking it into smaller stones. Supporting the movement of the jaw teeth is an eccentric shaft that runs through the fuselage frame. Eccentric motion is usually produced by a flywheel fixed to both ends of the shaft. Flywheels and eccentric support bearings often use spherical roller bearings, bearings must withstand huge impact loads, abrasive sewage and high temperatures.

peculiarity
1, low noise, less dust.
2, its crushing ratio is large, the product particle size is uniform.
3, simple structure, reliable work, low operating costs.
4, the lubrication system is safe and reliable, the parts are easy to replace, and the equipment is simple to maintain.
5, the crushing chamber is deep and no dead zone, improve the feeding capacity and output.
6, equipment energy saving: single-machine energy saving 15% ~ 30%, system energy saving more than double.
7, discharge port adjustment range is large, can meet the requirements of different users.

型号	Model number	Feed port size （mm）	Feed size（mm）	Discharge port adjustment range（mm）	Yield（t/h）	Rotational speed （r/min）	Power （kw）	Size （长x宽x高）（mm）	Weight （t）
150x250		150x250	125	10-40	1-3	268	4P5.5	760x700x860	0.6
200X300		200X300	180	15-50	2-6	260	4P7.5	915x780x990	0.8
220X350		220X350	180	18-60	3-10	276	4P11	1000x914x1112	1
250X400		250X400	210	20-70	5-21	300	6P15	1100x1032x1285	1.2
400X600		400X600	340	40-100	16-64	270	6P30	1623x1736x1615	6
500X750		500X750	425	50-100	40-110	268	6P55	1920x1850x1920	12
600X750		600X750	500	150-200	80-240	268	6P55	2020x1850x1920	15.8
600X900		600X900	500	65-160	50-160	254	6P55	2530x1900x2340	17
150X750		150X750	120	18-48	8-25	320	4P15	1170X1575X1030	2.3
250X1000		250X1000	210	25-60	16-52	330	6P30	1580X2006X1390	6

Henan Zhengxiang Machinery Co., Ltd

Featured Products

Ball mill

Gold mill

Jaw crusher

Henan Zhengxiang Machinery Co., Ltd